Aluminum & Aluminum Articles — US Tariff Rates
US tariff rates for aluminum and aluminum articles including unwrought aluminum, plates, sheets, foil, tubes, and structural shapes. HTS codes and import duties. Section 232 10% tariff applies.
Additional Tariffs Apply to This Chapter
Section 232 national security tariffs apply to many products in this chapter. Section 301 tariffs apply to imports from China. Use our Landed Cost Calculator for a full duty breakdown by country of origin.
HTS Codes in Chapter 76 — Aluminum & Aluminum Articles
| HTS Code | Description | Base Duty | Tariff Flags | Actions |
|---|---|---|---|---|
| 7601.10.30.00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | 2.6% | §232 +50%§301 +25%§122 +15% | |
| 7601.10.60 | Other | Free | §232 +50%§301 +25%§122 +15% | |
| 7601.20.30.00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | 2.6% | §232 +50%§301 +25%§122 +15% | |
| 7601.20.60.00 | Containing 25 percent or more by weight of silicon | 2.1% | §232 +50%§301 +25%§122 +15% | |
| 7601.20.90 | Other | Free | §232 +50%§301 +25%§122 +15% | |
| 7602.00.00 | Aluminum waste and scrap | Free | §232 +50%§301 +25%§122 +15% | |
| 7603.10.00.00 | Powders of non-lamellar structure | 5% | §232 +50%§301 +25%§122 +15% | |
| 7603.20.00.00 | Powders of lamellar structure; flakes | 3.9% | §232 +50%§301 +25%§122 +15% | |
| 7604.10.10.00 | Profiles | 5% | §232 +50%§301 +25%§122 +15% | |
| 7604.10.30.00 | Having a round cross section | 2.6% | §232 +50%§301 +25%§122 +15% | |
| 7604.10.50.00 | Other | 3% | §232 +50%§301 +25%§122 +15% | |
| 7604.21.00 | Hollow profiles | 1.5% | §232 +50%§301 +25%§122 +15% | |
| 7604.29.10 | Other profiles | 5% | §232 +50%§301 +25%§122 +15% | |
| 7604.29.30 | Having a round cross section | 2.6% | §232 +50%§301 +25%§122 +15% | |
| 7604.29.50 | Other | 3% | §232 +50%§301 +25%§122 +15% | |
| 7605.11.00.00 | Of which the maximum cross-sectional dimension exceeds 7 mm | 2.6% | §232 +50%§301 +25%§122 +15% | |
| 7605.19.00.00 | Other | 4.2% | §232 +50%§301 +25%§122 +15% | |
| 7605.21.00.00 | Of which the maximum cross-sectional dimension exceeds 7 mm | 2.6% | §232 +50%§301 +25%§122 +15% | |
| 7605.29.00.00 | Other | 4.2% | §232 +50%§301 +25%§122 +15% | |
| 7606.11.30 | Not clad | 3% | §232 +50%§301 +25%§122 +15% | |
| 7606.11.60.00 | Clad | 2.7% | §232 +50%§301 +25%§122 +15% | |
| 7606.12.30 | Not clad | 3% | §232 +50%§301 +25%§122 +15% | |
| 7606.12.60.00 | Clad | 6.5% | §232 +50%§301 +25%§122 +15% | |
| 7606.91.30 | Not clad | 3% | §232 +50%§301 +25%§122 +15% | |
| 7606.91.60 | Clad | 2.7% | §232 +50%§301 +25%§122 +15% | |
| 7606.92.30 | Not clad | 3% | §232 +50%§301 +25%§122 +15% | |
| 7606.92.60 | Clad | 6.5% | §232 +50%§301 +25%§122 +15% | |
| 7607.11.30.00 | Of a thickness not exceeding 0.01 mm | 5.8% | §232 +50%§301 +25%§122 +15% | |
| 7607.11.60 | Of a thickness exceeding 0.01 mm | 5.3% | §232 +50%§301 +25%§122 +15% | |
| 7607.11.90 | Other | 3% | §232 +50%§301 +25%§122 +15% | |
| 7607.19.10.00 | Etched capacitor foil | 5.3% | §232 +50%§301 +25%§122 +15% | |
| 7607.19.30.00 | Cut to shape, of a thickness not exceeding 0.15 mm | 5.7% | §232 +50%§301 +25%§122 +15% | |
| 7607.19.60.00 | Other | 3% | §232 +50%§301 +25%§122 +15% | |
| 7607.20.10.00 | Covered or decorated with a character, design, fancy effect or pattern | 3.7% | §232 +50%§301 +25%§122 +15% | |
| 7607.20.50.00 | Other | Free | §232 +50%§301 +25%§122 +15% | |
| 7608.10.00 | Of aluminum, not alloyed | 5.7% | §232 +50%§301 +25%§122 +15% | |
| 7608.20.00 | Of aluminum alloys | 5.7% | §232 +50%§301 +25%§122 +15% | |
| 7609.00.00.00 | Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves) | 5.7% | §232 +50%§301 +25%§122 +15% | |
| 7610.10.00 | Doors, windows and their frames and thresholds for doors | 5.7% | §232 +50%§301 +25%§122 +15% | |
| 7610.90.00 | Other | 5.7% | §232 +50%§301 +25%§122 +15% | |
| 7611.00.00 | Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment | 2.6% | §232 +50%§301 +25%§122 +15% | |
| 7612.10.00.00 | Collapsible tubular containers | 2.4% | §232 +50%§301 +25%§122 +15% | |
| 7612.90.10 | Of a capacity not exceeding 20 liters | 5.7% | §232 +50%§301 +25%§122 +15% | |
| 7612.90.50.00 | Other | Free | §232 +50%§301 +25%§122 +15% | |
| 7613.00.00.00 | Aluminum containers for compressed or liquefied gas | 5% | §232 +50%§301 +25%§122 +15% | |
| 7614.10.10.00 | Not fitted with fittings and not made up into articles | 4.9% | §232 +50%§301 +25%§122 +15% | |
| 7614.10.50.00 | Fitted with fittings or made up into articles | 4.9% | §232 +50%§301 +25%§122 +15% | |
| 7614.90.20 | Electrical conductors | 4.9% | §232 +50%§301 +25%§122 +15% | |
| 7614.90.40.00 | Other | 4.9% | §232 +50%§301 +25%§122 +15% | |
| 7614.90.50.00 | Fitted with fittings or made up into articles | 5.7% | §232 +50%§301 +25%§122 +15% | |
| 7615.10.11.00 | Pot scourers and scouring or polishing pads, gloves and the like | 3.1% | §232 +50%§301 +25%§122 +15% | |
| 7615.10.20 | Cast | 3.1% | §232 +50%§301 +25%§122 +15% | |
| 7615.10.30 | Other | 3.1% | §232 +50%§301 +25%§122 +15% | |
| 7615.10.50 | Cast | 3.1% | §232 +50%§301 +25%§122 +15% | |
| 7615.10.71 | Other | 3.1% | §232 +50%§301 +25%§122 +15% | |
| 7615.10.91.00 | Other | 3.1% | §232 +50%§301 +25%§122 +15% | |
| 7615.20.00.00 | Sanitary ware and parts thereof | 3.8% | §232 +50%§301 +25%§122 +15% | |
| 7616.10.10.00 | Nails, tacks and staples | 5.7% | §232 +50%§301 +25%§122 +15% | |
| 7616.10.30.00 | Rivets | 4.7% | §232 +50%§301 +25%§122 +15% | |
| 7616.10.50.00 | Cotters and cotter pins | 5.7% | §232 +50%§301 +25%§122 +15% | |
| 7616.10.70 | Having shanks, threads or holes over 6 mm in diameter | 5.5% | §232 +50%§301 +25%§122 +15% | |
| 7616.10.90 | Other | 6% | §232 +50%§301 +25%§122 +15% | |
| 7616.91.00.00 | Cloth, grill, netting and fencing, of aluminum wire | 2.5% | §232 +50%§301 +25%§122 +15% | |
| 7616.99.10.00 | Luggage frames | Free | §232 +50%§301 +25%§122 +15% | |
| 7616.99.51 | Other | 2.5% | §232 +50%§301 +25%§122 +15% |
Related HTS Chapters
About HTS Chapter 76 — Aluminum & Aluminum Articles
HTS Chapter 76 covers aluminum & aluminum articles under the US Harmonized Tariff Schedule (HTS). The HTS is maintained by the US International Trade Commission (USITC) and updated periodically to reflect trade policy changes including executive orders, Section 232 national security tariffs, Section 301 China tariffs, and Section 122 emergency tariffs.
To import goods under Chapter 76, US importers must declare the correct 10-digit HTS code on their Customs entry. The duty rate shown is the general (MFN) rate. Special rates may apply under free trade agreements (FTAs) such as USMCA, CPTPP, or bilateral agreements. Use the FTA Checker to see if preferential rates apply to your shipment.
Anti-dumping (AD) and countervailing duty (CVD) orders may impose additional duties on specific products and countries of origin beyond the rates shown here. Always consult with a licensed customs broker for classification decisions.