An HTS (Harmonized Tariff Schedule) code is a 10-digit classification number used by US Customs and Border Protection to identify imported goods and determine applicable duty rates. The first 6 digits are standardized internationally under the Harmonized System, while the last 4 digits are specific to the United States.

How are US tariff rates determined?

US tariff rates are set by Congress and administered by CBP. The base MFN (Most Favored Nation) rate applies to most trading partners. Additional special tariffs — such as Section 301 (China), Section 232 (steel and aluminum), and Section 122 (temporary global surcharge, 10–15% per Proclamation 11012) — may apply on top of the base rate. Note that Section 122 does not stack with Section 232: goods already subject to §232 actions are excluded from the §122 surcharge.

What are Section 301 tariffs?

Section 301 tariffs are additional duties imposed on Chinese goods under the Trade Act of 1974, in response to unfair trade practices. They range from 7.5% to 100% depending on the product category and apply on top of the standard MFN duty rate. Four separate lists cover approximately $370 billion of annual imports.

How do I find the tariff rate for my product?

Use the search bar on this site to describe your product in plain English — our AI identifies the correct HTS code and shows all applicable duty rates including base MFN, Section 301, Section 232, and any other overlays. You can also browse by HTS chapter or product category.

What is a landed cost?

Landed cost is the total cost of importing a product to its destination, including the product price (FOB), ocean or air freight, insurance, US Customs duties, Merchandise Processing Fee (MPF), Harbor Maintenance Fee (HMF), and any other applicable surcharges. It represents the true cost of an imported good before domestic distribution.

Harmonized Tariff Schedule

Chapter 73: Iron/Steel Articles

Name: US Tariff Rates - Chapter 73: Iron/Steel Articles
Creator: US Tariff Rates
License: https://ustariffrates.com/terms

HTS Chapter 73 covers iron/steel articles imported into the United States. Use this page to review tariff classifications, MFN duty rates, and special program rates by code.

HTS Codes in Chapter 73

757 codes

Code	Description	General Rate	Special Rate	Flags
7301	Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel:	Free	-	Section 301Section 232
7301.10.00.00	Sheet piling	Free	-	Section 301Section 232
7301.20	Angles, shapes and sections:	Free	-	Section 301Section 232
7301.20.10.00	Of iron or nonalloy steel	Free	-	Section 301Section 232
7301.20.50.00	Of alloy steel	Free	-	Section 301Section 232
7302	Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails:	Free	-	Section 301Section 232
7302.10	Rails:	Free	-	Section 301Section 232
7302.10.10	Of iron or nonalloy steel	Free	-	Section 301Section 232
7302.10.10.10	Standard tee rails over 30 kg per meter	Free	-	Section 301Section 232
7302.10.10.15	Over 30 kg per meter	Free	-	Section 301Section 232
7302.10.10.25	Other	Free	-	Section 301Section 232
7302.10.10.35	Standard tee rails over 30 kg per meter	Free	-	Section 301Section 232
7302.10.10.45	Over 30 kg per meter	Free	-	Section 301Section 232
7302.10.10.55	Other	Free	-	Section 301Section 232
7302.10.10.65	Railway rails for rerolling	Free	-	Section 301Section 232
7302.10.10.75	Other	Free	-	Section 301Section 232
7302.10.50	Of alloy steel	Free	-	Section 301Section 232
7302.10.50.20	New	Free	-	Section 301Section 232
7302.10.50.40	Railway rails for rerolling	Free	-	Section 301Section 232
7302.10.50.60	Other	Free	-	Section 301Section 232
7302.30.00.00	Switch blades, crossing frogs, point rods and other crossing pieces	Free	-	Section 301Section 232
7302.40.00.00	Fish-plates and sole plates	Free	-	Section 301Section 232
7302.90	Other:	Free	-	Section 301Section 232
7302.90.10.00	Sleepers (cross-ties)	Free	-	Section 301Section 232
7302.90.90.00	Other	Free	-	Section 301Section 232
7303.00.00	Tubes, pipes and hollow profiles, of cast iron	Free	-	Section 301Section 232
7303.00.00.30	Soil pipe	Free	-	Section 301Section 232
7303.00.00.60	Pressure pipe with an inside diameter of less than 356 mm	Free	-	Section 301Section 232
7303.00.00.90	Other	Free	-	Section 301Section 232
7304	Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel:	Free	-	Section 301Section 232
7304.11.00	Of stainless steel	Free	-	Section 301Section 232
7304.11.00.20	Having an outside diameter not exceeding 114.3 mm	Free	-	Section 301Section 232
7304.11.00.50	Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm	Free	-	Section 301Section 232
7304.11.00.80	Having an outside diameter exceeding 406.4 mm	Free	-	Section 301Section 232
7304.19	Other:	Free	-	Section 301Section 232
7304.19.10	Of iron or nonalloy steel	Free	-	Section 301Section 232
7304.19.10.20	Having an outside diameter not exceeding 114.3 mm	Free	-	Section 301Section 232
7304.19.10.30	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	Free	-	Section 301Section 232
7304.19.10.45	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.19.10.60	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.19.10.80	Having an outside diameter exceeding 406.4 mm	Free	-	Section 301Section 232
7304.19.50	Of other alloy steel	Free	-	Section 301Section 232
7304.19.50.20	Having an outside diameter not exceeding 114.3 mm	Free	-	Section 301Section 232
7304.19.50.50	Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm	Free	-	Section 301Section 232
7304.19.50.80	Having an outside diameter exceeding 406.4 mm	Free	-	Section 301Section 232
7304.22.00	Drill pipe of stainless steel	Free	-	Section 301Section 232
7304.22.00.30	Having a wall thickness not exceeding 9.5 mm	Free	-	Section 301Section 232
7304.22.00.45	Having a wall thickness exceeding 9.5 mm	Free	-	Section 301Section 232
7304.22.00.60	Having an outside diameter exceeding 168.3 mm	Free	-	Section 301Section 232
7304.23	Other drill pipe:	Free	-	Section 301Section 232
7304.23.30.00	Of iron or nonalloy steel	Free	-	Section 301Section 232
7304.23.60	Of alloy steel	Free	-	Section 301Section 232
7304.23.60.30	Having a wall thickness not exceeding 9.5 mm	Free	-	Section 301Section 232
7304.23.60.45	Having a wall thickness exceeding 9.5 mm	Free	-	Section 301Section 232
7304.23.60.60	Having an outside diameter exceeding 168.3 mm	Free	-	Section 301Section 232
7304.24	Other, of stainless steel:	Free	-	Section 301Section 232
7304.24.30	Threaded or coupled	Free	-	Section 301Section 232
7304.24.30.10	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.24.30.20	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.24.30.30	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.24.30.40	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.24.30.45	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm	Free	-	Section 301Section 232
7304.24.30.80	Having an outside diameter exceeding 406.4 mm	Free	-	Section 301Section 232
7304.24.40	Other	Free	-	Section 301Section 232
7304.24.40.10	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.24.40.20	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.24.40.30	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.24.40.40	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.24.40.50	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.24.40.60	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.24.40.80	Having an outside diameter exceeding 406.4 mm	Free	-	Section 301Section 232
7304.24.60	Tubing	Free	-	Section 301Section 232
7304.24.60.15	Having a wall thickness not exceeding 9.5 mm	Free	-	Section 301Section 232
7304.24.60.30	Having a wall thickness exceeding 9.5 mm	Free	-	Section 301Section 232
7304.24.60.45	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	Free	-	Section 301Section 232
7304.24.60.60	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	Free	-	Section 301Section 232
7304.24.60.75	Having an outside diameter exceeding 406.4 mm	Free	-	Section 301Section 232
7304.29	Other:	Free	-	Section 301Section 232
7304.29.10	Threaded or coupled	Free	-	Section 301Section 232
7304.29.10.10	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.29.10.20	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.29.10.30	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.29.10.40	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.29.10.50	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.29.10.60	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.29.10.80	Having an outside diameter exceeding 406.4 mm	Free	-	Section 301Section 232
7304.29.20	Other	Free	-	Section 301Section 232
7304.29.20.10	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.29.20.20	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.29.20.30	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.29.20.40	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.29.20.50	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.29.20.60	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.29.20.80	Having an outside diameter exceeding 406.4 mm	Free	-	Section 301Section 232
7304.29.31	Threaded or coupled	Free	-	Section 301Section 232
7304.29.31.10	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.29.31.20	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.29.31.30	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.29.31.40	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.29.31.50	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.29.31.60	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.29.31.80	Having an outside diameter exceeding 406.4 mm	Free	-	Section 301Section 232
7304.29.41	Other	Free	-	Section 301Section 232
7304.29.41.10	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.29.41.20	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.29.41.30	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.29.41.40	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.29.41.50	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.29.41.60	Having a wall thickness of 12.7 mm or more	Free	-	Section 301Section 232
7304.29.41.80	Having an outside diameter exceeding 406.4 mm	Free	-	Section 301Section 232
7304.29.50	Of iron or nonalloy steel	Free	-	Section 301Section 232
7304.29.50.15	Having a wall thickness not exceeding 9.5 mm	Free	-	Section 301Section 232
7304.29.50.30	Having a wall thickness exceeding 9.5 mm	Free	-	Section 301Section 232
7304.29.50.45	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	Free	-	Section 301Section 232
7304.29.50.60	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	Free	-	Section 301Section 232
7304.29.50.75	Having an outside diameter exceeding 406.4 mm	Free	-	Section 301Section 232
7304.29.61	Of other alloy steel	Free	-	Section 301Section 232
7304.29.61.15	Having a wall thickness not exceeding 9.5 mm	Free	-	Section 301Section 232
7304.29.61.30	Having a wall thickness exceeding 9.5 mm	Free	-	Section 301Section 232
7304.29.61.45	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	Free	-	Section 301Section 232
7304.29.61.60	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	Free	-	Section 301Section 232
7304.29.61.75	Having an outside diameter exceeding 406.4 mm	Free	-	Section 301Section 232
7304.31	Cold-drawn or cold-rolled (cold-reduced):	Free	-	Section 301Section 232
7304.31.30.00	Hollow bars	Free	-	Section 301Section 232
7304.31.60	Other	Free	-	Section 301Section 232
7304.31.60.10	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	Free	-	Section 301Section 232
7304.31.60.50	Other	Free	-	Section 301Section 232
7304.39.00	Other	Free	-	Section 301Section 232
7304.39.00.02	Having an outside diameter less than 38.1 mm	Free	-	Section 301Section 232
7304.39.00.04	Having an outside diameter of 38.1 mm or more but less than 190.5 mm	Free	-	Section 301Section 232
7304.39.00.06	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm	Free	-	Section 301Section 232
7304.39.00.08	Having an outside diameter exceeding 285.8 mm	Free	-	Section 301Section 232
7304.39.00.16	Galvanized, having an outside diameter not exceeding 114.3 mm	Free	-	Section 301Section 232
7304.39.00.20	Having an outside diameter less than 38.1 mm	Free	-	Section 301Section 232
7304.39.00.24	Having a wall thickness less than 6.4 mm	Free	-	Section 301Section 232
7304.39.00.28	Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm	Free	-	Section 301Section 232
7304.39.00.32	Having a wall thickness exceeding 12.7 mm	Free	-	Section 301Section 232
7304.39.00.36	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.39.00.40	Having a wall thickness of 12.7 mm or more but less than 19 mm	Free	-	Section 301Section 232
7304.39.00.44	Having a wall thickness of 19 mm or more	Free	-	Section 301Section 232
7304.39.00.48	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.39.00.52	Having a wall thickness of 12.7 mm or more but less than 19 mm	Free	-	Section 301Section 232
7304.39.00.56	Having a wall thickness of 19 mm or more	Free	-	Section 301Section 232
7304.39.00.62	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.39.00.68	Having a wall thickness of 12.7 mm or more but less than 19 mm	Free	-	Section 301Section 232
7304.39.00.72	Having a wall thickness of 19 mm or more	Free	-	Section 301Section 232
7304.39.00.76	Having a wall thickness less than 19 mm	Free	-	Section 301Section 232
7304.39.00.80	Having a wall thickness of 19 mm or more	Free	-	Section 301Section 232
7304.41	Cold-drawn or cold-rolled (cold-reduced):	Free	-	Section 301Section 232
7304.41.30	Of an external diameter of less than 19 mm	Free	-	Section 301Section 232
7304.41.30.05	Of high-nickel alloy steel	Free	-	Section 301Section 232
7304.41.30.15	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	Free	-	Section 301Section 232
7304.41.30.45	Other	Free	-	Section 301Section 232
7304.41.60	Other	Free	-	Section 301Section 232
7304.41.60.05	Of high-nickel alloy steel	Free	-	Section 301Section 232
7304.41.60.15	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	Free	-	Section 301Section 232
7304.41.60.45	Other	Free	-	Section 301Section 232
7304.49.00	Other	Free	-	Section 301Section 232
7304.49.00.05	Of high-nickel alloy steel	Free	-	Section 301Section 232
7304.49.00.15	Hollow bars	Free	-	Section 301Section 232
7304.49.00.45	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	Free	-	Section 301Section 232
7304.49.00.60	Other	Free	-	Section 301Section 232
7304.51	Cold-drawn or cold-rolled (cold-reduced):	Free	-	Section 301Section 232
7304.51.10.00	Suitable for use in the manufacture of ball or roller bearings	Free	-	Section 301Section 232
7304.51.50	Other	Free	-	Section 301Section 232
7304.51.50.05	Of high-nickel alloy steel	Free	-	Section 301Section 232
7304.51.50.15	Of heat-resisting steel	Free	-	Section 301Section 232
7304.51.50.45	Other	Free	-	Section 301Section 232
7304.51.50.60	Other	Free	-	Section 301Section 232
7304.59	Other:	Free	-	Section 301Section 232
7304.59.10.00	Suitable for use in the manufacture of ball or roller bearings	Free	-	Section 301Section 232
7304.59.20	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	Free	-	Section 301Section 232
7304.59.20.30	Of heat-resisting steel	Free	-	Section 301Section 232
7304.59.20.40	Having an outside diameter less than 38.1 mm	Free	-	Section 301Section 232
7304.59.20.45	Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm	Free	-	Section 301Section 232
7304.59.20.55	Having an outside diameter exceeding 114.3 mm but less than 190.5 mm	Free	-	Section 301Section 232
7304.59.20.60	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm	Free	-	Section 301Section 232
7304.59.20.70	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm	Free	-	Section 301Section 232
7304.59.20.80	Having an outside diameter exceeding 406.4 mm	Free	-	Section 301Section 232
7304.59.60.00	Of heat-resisting steel	Free	-	Section 301Section 232
7304.59.80	Other	Free	-	Section 301Section 232
7304.59.80.10	Having an outside diameter less than 38.1 mm	Free	-	Section 301Section 232
7304.59.80.15	Having a wall thickness less than 6.4 mm	Free	-	Section 301Section 232
7304.59.80.20	Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm	Free	-	Section 301Section 232
7304.59.80.25	Having a wall thickness exceeding 12.7 mm	Free	-	Section 301Section 232
7304.59.80.30	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.59.80.35	Having a wall thickness of 12.7 mm or more but less than 19 mm	Free	-	Section 301Section 232
7304.59.80.40	Having a wall thickness of 19 mm or more	Free	-	Section 301Section 232
7304.59.80.45	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.59.80.50	Having a wall thickness of 12.7 mm or more but less than 19 mm	Free	-	Section 301Section 232
7304.59.80.55	Having a wall thickness of 19 mm or more	Free	-	Section 301Section 232
7304.59.80.60	Having a wall thickness less than 12.7 mm	Free	-	Section 301Section 232
7304.59.80.65	Having a wall thickness of 12.7 mm or more but less than 19 mm	Free	-	Section 301Section 232
7304.59.80.70	Having a wall thickness of 19 mm or more	Free	-	Section 301Section 232
7304.59.80.80	Having an outside diameter exceeding 406.4 mm	Free	-	Section 301Section 232
7304.90	Other:	Free	-	Section 301Section 232
7304.90.10.00	Of iron or nonalloy steel	Free	-	Section 301Section 232
7304.90.30.00	Of alloy steel	Free	-	Section 301Section 232
7304.90.50.00	Of iron or nonalloy steel	Free	-	Section 301Section 232
7304.90.70.00	Of alloy steel	Free	-	Section 301Section 232
7305	Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel:	Free	-	Section 301Section 232
7305.11	Longitudinally submerged arc welded:	Free	-	Section 301Section 232
7305.11.10	Of iron or nonalloy steel	Free	-	Section 301Section 232
7305.11.10.30	With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm	Free	-	Section 301Section 232
7305.11.10.60	With an external diameter exceeding 609.6 mm	Free	-	Section 301Section 232
7305.11.50.00	Of alloy steel	Free	-	Section 301Section 232
7305.12	Other, longitudinally welded:	Free	-	Section 301Section 232
7305.12.10	Of iron or nonalloy steel	Free	-	Section 301Section 232
7305.12.10.30	With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm	Free	-	Section 301Section 232
7305.12.10.60	With an external diameter exceeding 609.6 mm	Free	-	Section 301Section 232
7305.12.50.00	Of alloy steel	Free	-	Section 301Section 232
7305.19	Other:	Free	-	Section 301Section 232
7305.19.10	Of iron or nonalloy steel	Free	-	Section 301Section 232
7305.19.10.30	With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm	Free	-	Section 301Section 232
7305.19.10.60	With an external diameter exceeding 609.6 mm	Free	-	Section 301Section 232
7305.19.50.00	Of alloy steel	Free	-	Section 301Section 232
7305.20	Casing of a kind used in drilling for oil or gas:	Free	-	Section 301Section 232
7305.20.20.00	Threaded or coupled	Free	-	Section 301Section 232
7305.20.40.00	Other	Free	-	Section 301Section 232
7305.20.60.00	Threaded or coupled	Free	-	Section 301Section 232
7305.20.80.00	Other	Free	-	Section 301Section 232
7305.31	Longitudinally welded:	Free	-	Section 301Section 232
7305.31.20.00	Tapered pipes and tubes of steel principally used as parts of illuminating articles	Free	-	Section 301Section 232
7305.31.40.00	Of iron or nonalloy steel	Free	-	Section 301Section 232
7305.31.60	Of alloy steel	Free	-	Section 301Section 232
7305.31.60.10	Of stainless steel	Free	-	Section 301Section 232
7305.31.60.90	Other	Free	-	Section 301Section 232
7305.39	Other:	Free	-	Section 301Section 232
7305.39.10.00	Of iron or nonalloy steel	Free	-	Section 301Section 232
7305.39.50.00	Of alloy steel	Free	-	Section 301Section 232
7305.90	Other:	Free	-	Section 301Section 232
7305.90.10.00	Of iron or nonalloy steel	Free	-	Section 301Section 232
7305.90.50.00	Of alloy steel	Free	-	Section 301Section 232
7306	Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel:	Free	-	Section 301Section 232
7306.11.00	Welded, of stainless steel	Free	-	Section 301Section 232
7306.11.00.10	With an outside diameter not exceeding 114.3 mm	Free	-	Section 301Section 232
7306.11.00.50	With an outside diameter exceeding 114.3 mm	Free	-	Section 301Section 232
7306.19	Other:	Free	-	Section 301Section 232
7306.19.10	Of iron or nonalloy steel	Free	-	Section 301Section 232
7306.19.10.10	With an outside diameter not exceeding 114.3 mm	Free	-	Section 301Section 232
7306.19.10.50	With an outside diameter exceeding 114.3 mm	Free	-	Section 301Section 232
7306.19.51	Of alloy steel	Free	-	Section 301Section 232
7306.19.51.10	With an outside diameter not exceeding 114.3 mm	Free	-	Section 301Section 232
7306.19.51.50	With an outside diameter exceeding 114.3 mm	Free	-	Section 301Section 232
7306.21	Welded of stainless steel:	Free	-	Section 301Section 232
7306.21.30.00	Threaded or coupled	Free	-	Section 301Section 232
7306.21.40.00	Other	Free	-	Section 301Section 232
7306.21.80	Tubing	Free	-	Section 301Section 232
7306.21.80.10	Imported with coupling	Free	-	Section 301Section 232
7306.21.80.50	Other	Free	-	Section 301Section 232
7306.29	Other:	Free	-	Section 301Section 232
7306.29.10	Threaded or coupled	Free	-	Section 301Section 232
7306.29.10.30	Imported with coupling	Free	-	Section 301Section 232
7306.29.10.90	Other	Free	-	Section 301Section 232
7306.29.20.00	Other	Free	-	Section 301Section 232
7306.29.31.00	Threaded or coupled	Free	-	Section 301Section 232
7306.29.41.00	Other	Free	-	Section 301Section 232
7306.29.60	Of iron or nonalloy steel	Free	-	Section 301Section 232
7306.29.60.10	Imported with coupling	Free	-	Section 301Section 232
7306.29.60.50	Other	Free	-	Section 301Section 232
7306.29.81	Other	Free	-	Section 301Section 232
7306.29.81.10	Imported with coupling	Free	-	Section 301Section 232
7306.29.81.50	Other	Free	-	Section 301Section 232
7306.30	Other, welded, of circular cross section, of iron or nonalloy steel:	Free	-	Section 301Section 232
7306.30.10.00	Having a wall thickness of less than 1.65 mm	Free	-	Section 301Section 232
7306.30.30.00	Tapered steel pipes and tubes principally used as parts of illuminating articles	Free	-	Section 301Section 232
7306.30.50	Other	Free	-	Section 301Section 232
7306.30.50.10	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn	Free	-	Section 301Section 232
7306.30.50.15	Other, cold-drawn	Free	-	Section 301Section 232
7306.30.50.20	Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mm	Free	-	Section 301Section 232
7306.30.50.26	With an outside diameter not exceeding 50.8 mm	Free	-	Section 301Section 232
7306.30.50.27	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	Free	-	Section 301Section 232
7306.30.50.28	Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit	Free	-	Section 301Section 232
7306.30.50.31	With an outside diameter not exceeding 50.8 mm	Free	-	Section 301Section 232
7306.30.50.33	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	Free	-	Section 301Section 232
7306.30.50.35	Tube and pipe hollows for redrawing	Free	-	Section 301Section 232
7306.30.50.41	With an outside diameter not exceeding 50.8 mm	Free	-	Section 301Section 232
7306.30.50.43	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	Free	-	Section 301Section 232
7306.30.50.56	With an outside diameter not exceeding 50.8 mm	Free	-	Section 301Section 232
7306.30.50.57	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	Free	-	Section 301Section 232
7306.30.50.85	Galvanized	Free	-	Section 301Section 232
7306.30.50.90	Other	Free	-	Section 301Section 232
7306.40	Other, welded, of circular cross section, of stainless steel:	Free	-	Section 301Section 232
7306.40.10	Having a wall thickness of less than 1.65 mm	Free	-	Section 301Section 232
7306.40.10.10	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	Free	-	Section 301Section 232
7306.40.10.15	Other	Free	-	Section 301Section 232
7306.40.10.90	Other	Free	-	Section 301Section 232
7306.40.50	Having a wall thickness of 1.65 mm or more	Free	-	Section 301Section 232
7306.40.50.05	Of high-nickel alloy steel	Free	-	Section 301Section 232
7306.40.50.15	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn	Free	-	Section 301Section 232
7306.40.50.40	Containing more than 0.5 percent but less than 24 percent by weight of nickel	Free	-	Section 301Section 232
7306.40.50.42	Containing less than 15 percent by weight of chromium	Free	-	Section 301Section 232
7306.40.50.44	Other	Free	-	Section 301Section 232
7306.40.50.62	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	Free	-	Section 301Section 232
7306.40.50.64	Other	Free	-	Section 301Section 232
7306.40.50.80	Other	Free	-	Section 301Section 232
7306.40.50.85	Containing more than 0.5 percent but less than 24 percent by weight of nickel	Free	-	Section 301Section 232
7306.40.50.90	Other	Free	-	Section 301Section 232
7306.50	Other, welded, of circular cross section, of other alloy steel:	Free	-	Section 301Section 232
7306.50.10.00	Having a wall thickness of less than 1.65 mm	Free	-	Section 301Section 232
7306.50.30.00	Tapered pipes and tubes of steel principally used as parts of illuminating articles	Free	-	Section 301Section 232
7306.50.50	Other	Free	-	Section 301Section 232
7306.50.50.10	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn	Free	-	Section 301Section 232
7306.50.50.30	Other, cold-drawn or cold-rolled (cold- reduced)	Free	-	Section 301Section 232
7306.50.50.50	With an outside diameter not exceeding 114.3 mm	Free	-	Section 301Section 232
7306.50.50.70	With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm	Free	-	Section 301Section 232
7306.61	Of square or rectangular cross section:	Free	-	Section 301Section 232
7306.61.10.00	Of iron or nonalloy steel	Free	-	Section 301Section 232
7306.61.30.00	Of alloy steel	Free	-	Section 301Section 232
7306.61.50.00	Of iron or nonalloy steel	Free	-	Section 301Section 232
7306.61.70	Of alloy steel	Free	-	Section 301Section 232
7306.61.70.30	Of stainless steel	Free	-	Section 301Section 232
7306.61.70.60	Other	Free	-	Section 301Section 232
7306.69	Of other noncircular cross section:	Free	-	Section 301Section 232
7306.69.10.00	Of iron or nonalloy steel	Free	-	Section 301Section 232
7306.69.30.00	Of alloy steel	Free	-	Section 301Section 232
7306.69.50.00	Of iron or nonalloy steel	Free	-	Section 301Section 232
7306.69.70	Of alloy steel	Free	-	Section 301Section 232
7306.69.70.30	Of stainless steel	Free	-	Section 301Section 232
7306.69.70.60	Other	Free	-	Section 301Section 232
7306.90	Other:	Free	-	Section 301Section 232
7306.90.10.00	Of iron or nonalloy steel	Free	-	Section 301Section 232
7306.90.50.00	Of alloy steel	Free	-	Section 301Section 232
7307	Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel:	Free	-	Section 301Section 232
7307.11.00	Of nonmalleable cast iron	4.8%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.11.00.30	For threaded pipe	Free	-	Section 301Section 232
7307.11.00.45	For cast-iron soil pipe	Free	-	Section 301Section 232
7307.11.00.60	Other	Free	-	Section 301Section 232
7307.19	Other:	Free	-	Section 301Section 232
7307.19.30	Ductile fittings	5.6%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.19.30.40	Grooved-end fittings (including grooved couplings)	Free	-	Section 301Section 232
7307.19.30.60	Threaded	Free	-	Section 301Section 232
7307.19.30.70	With mechanical, push-on (rubber compression) or flanged joints attached	Free	-	Section 301Section 232
7307.19.30.85	Other	Free	-	Section 301Section 232
7307.19.90	Other	6.2%	Free (A+,AU,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301Section 232
7307.19.90.30	Unions	Free	-	Section 301Section 232
7307.19.90.40	Grooved-end fittings (including grooved couplings)	Free	-	Section 301Section 232
7307.19.90.60	Threaded	Free	-	Section 301Section 232
7307.19.90.80	Other	Free	-	Section 301Section 232
7307.21	Flanges:	Free	-	Section 301Section 232
7307.21.10.00	Not machined, not tooled and not otherwise processed after forging	3.3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.21.50.00	Other	5.6%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.22	Threaded elbows, bends and sleeves:	Free	-	Section 301Section 232
7307.22.10.00	Sleeves (couplings)	Free	-	Section 301Section 232
7307.22.50.00	Other	6.2%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.23.00	Butt welding fittings	5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.23.00.30	Not machined, not tooled and not otherwise processed after forming	Free	-	Section 301Section 232
7307.23.00.90	Other	Free	-	Section 301Section 232
7307.29.00	Other	5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.29.00.30	Nipples	Free	-	Section 301Section 232
7307.29.00.90	Other	Free	-	Section 301Section 232
7307.91	Flanges:	Free	-	Section 301Section 232
7307.91.10.00	Of iron or nonalloy steel	3.3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.91.30.00	Of alloy steel (except stainless steel)	3.2%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.91.50	Other	5.5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.75% (JP)	Section 301Section 232
7307.91.50.10	Of iron or nonalloy steel	Free	-	Section 301Section 232
7307.91.50.30	Of alloy steel (except stainless steel)	Free	-	Section 301Section 232
7307.91.50.50	Of iron or nonalloy steel	Free	-	Section 301Section 232
7307.91.50.70	Of alloy steel (except stainless steel)	Free	-	Section 301Section 232
7307.92	Threaded elbows, bends and sleeves:	Free	-	Section 301Section 232
7307.92.30	Sleeves (couplings)	Free	-	Section 301Section 232
7307.92.30.10	Of iron or nonalloy steel	Free	-	Section 301Section 232
7307.92.30.30	Of alloy steel (except stainless steel)	Free	-	Section 301Section 232
7307.92.90.00	Other	6.2%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 3.1% (JP)	Section 301Section 232
7307.93	Butt welding fittings:	Free	-	Section 301Section 232
7307.93.30	Of iron or nonalloy steel	6.2%	Free (A+,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.93.30.10	Not machined, not tooled and not otherwise processed after forging	Free	-	Section 301Section 232
7307.93.30.40	Other	Free	-	Section 301Section 232
7307.93.60.00	Of alloy steel (except stainless steel)	5.5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.93.90	With an inside diameter of 360 mm or more	4.3%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.93.90.10	Not machined, not tooled and not otherwise processed after forging	Free	-	Section 301Section 232
7307.93.90.40	Other	Free	-	Section 301Section 232
7307.93.90.60	Of alloy steel (except stainless steel)	Free	-	Section 301Section 232
7307.99	Other:	Free	-	Section 301Section 232
7307.99.10.00	Of iron or nonalloy steel	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.99.30.00	Of alloy steel (except stainless steel)	3.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.99.50	Other	4.3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7307.99.50.15	Nipples	Free	-	Section 301Section 232
7307.99.50.45	Other	Free	-	Section 301Section 232
7307.99.50.60	Of alloy steel (except stainless steel)	Free	-	Section 301Section 232
7308	Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel:	Free	-	Section 301Section 232
7308.10.00.00	Bridges and bridge sections	Free	-	Section 301Section 232
7308.20.00	Towers and lattice masts	Free	-	Section 301Section 232
7308.20.00.30	Tubular, whether or not tapered, and sectional components thereof	Free	-	Section 301Section 232
7308.20.00.35	Tubular wind turbine towers, whether or not tapered, and sectional components thereof	Free	-	Section 301Section 232
7308.20.00.90	Other	Free	-	Section 301Section 232
7308.30	Doors, windows and their frames and thresholds for doors:	Free	-	Section 301Section 232
7308.30.10.00	Of stainless steel	Free	-	Section 301Section 232
7308.30.50	Other	Free	-	Section 301Section 232
7308.30.50.15	Windows and their frames	Free	-	Section 301Section 232
7308.30.50.25	Thresholds for doors	Free	-	Section 301Section 232
7308.30.50.50	Other	Free	-	Section 301Section 232
7308.40.00.00	Equipment for scaffolding, shuttering, propping or pit- propping	Free	-	Section 301Section 232
7308.90	Other:	Free	-	Section 301Section 232
7308.90.30.00	Not in part of alloy steel	Free	-	Section 301Section 232
7308.90.60.00	Other	Free	-	Section 301Section 232
7308.90.70.00	Steel grating	Free	-	Section 301Section 232
7308.90.95	Other	Free	-	Section 301Section 232
7308.90.95.30	Sheet-metal roofing, siding, flooring and roof drainage equipment	Free	-	Section 301Section 232
7308.90.95.60	Architectural and ornamental work	Free	-	Section 301Section 232
7308.90.95.90	Other	Free	-	Section 301Section 232
7309.00.00	Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment	Free	-	Section 301Section 232
7309.00.00.30	Tanks	Free	-	Section 301Section 232
7309.00.00.90	Other	Free	-	Section 301Section 232
7310	Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment:	Free	-	Section 301Section 232
7310.10.00	Of a capacity of 50 liters or more	Free	-	Section 301Section 232
7310.10.00.05	Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter.	Free	-	Section 301Section 232
7310.10.00.15	Empty steel drums and barrels	Free	-	Section 301Section 232
7310.10.00.90	Other	Free	-	Section 301Section 232
7310.21.00	Cans which are to be closed by soldering or crimping	Free	-	Section 301Section 232
7310.21.00.25	Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods	Free	-	Section 301Section 232
7310.21.00.70	Containers of a circular cross section, of a capacity not exceeding 11.4 liters, of a kind used for aerosols	Free	-	Section 301Section 232
7310.21.00.75	Other	Free	-	Section 301Section 232
7310.29.00	Other	Free	-	Section 301Section 232
7310.29.00.20	Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter	Free	-	Section 301Section 232
7310.29.00.30	Other	Free	-	Section 301Section 232
7310.29.00.55	Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter	Free	-	Section 301Section 232
7310.29.00.65	Other	Free	-	Section 301Section 232
7311.00.00	Containers for compressed or liquefied gas, of iron or steel	Free	-	Section 301Section 232
7311.00.00.30	Seamless steel containers not overwrapped, marked DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E followed by a specific exemption number	Free	-	Section 301Section 232
7311.00.00.60	Other	Free	-	Section 301Section 232
7311.00.00.90	Other	Free	-	Section 301Section 232
7312	Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated:	Free	-	Section 301Section 232
7312.10	Stranded wire, ropes and cables:	Free	-	Section 301Section 232
7312.10.05.00	Fitted with fittings or made up into articles	Free	-	Section 301Section 232
7312.10.10	Other	Free	-	Section 301Section 232
7312.10.10.30	Tire cord	Free	-	Section 301Section 232
7312.10.10.50	Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5	Free	-	Section 301Section 232
7312.10.10.70	Other	Free	-	Section 301Section 232
7312.10.20.00	Fitted with fittings or made up into articles	Free	-	Section 301Section 232
7312.10.30	Other	Free	-	Section 301Section 232
7312.10.30.05	Tire cord	Free	-	Section 301Section 232
7312.10.30.10	Covered with textile or other non- metallic material	Free	-	Section 301Section 232
7312.10.30.12	Other	Free	-	Section 301Section 232
7312.10.30.20	Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5	Free	-	Section 301Section 232
7312.10.30.45	Of brass plated wire	Free	-	Section 301Section 232
7312.10.30.65	ACSR core strand	Free	-	Section 301Section 232
7312.10.30.70	Covered with textile or other nonmetallic material	Free	-	Section 301Section 232
7312.10.30.74	Other	Free	-	Section 301Section 232
7312.10.30.80	Other	Free	-	Section 301Section 232
7312.10.50.00	Fitted with fittings or made up into articles	Free	-	Section 301Section 232
7312.10.60	Other	Free	-	Section 301Section 232
7312.10.60.30	With a diameter not exceeding 9.5 mm	Free	-	Section 301Section 232
7312.10.60.60	Other	Free	-	Section 301Section 232
7312.10.70.00	Fitted with fittings or made up into articles	Free	-	Section 301Section 232
7312.10.80.00	Of brass plated wire	Free	-	Section 301Section 232
7312.10.90	Other	Free	-	Section 301Section 232
7312.10.90.30	With a diameter not exceeding 9.5 mm	Free	-	Section 301Section 232
7312.10.90.60	With a diameter exceeding 9.5 mm	Free	-	Section 301Section 232
7312.10.90.90	Other	Free	-	Section 301Section 232
7312.90.00.00	Other	Free	-	Section 301Section 232
7313.00.00.00	Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel	Free	-	Section 301Section 232
7314	Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel:	Free	-	Section 301Section 232
7314.12	Endless bands for machinery, of stainless steel:	Free	-	Section 301Section 232
7314.12.10.00	With meshes not finer than 12 wires to the lineal centimeter in warp or filling	Free	-	Section 301Section 232
7314.12.20.00	With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling	Free	-	Section 301Section 232
7314.12.30.00	With 94 or more wires to the lineal centimeter	Free	-	Section 301Section 232
7314.12.60.00	Other	Free	-	Section 301Section 232
7314.12.90.00	Other	Free	-	Section 301Section 232
7314.14	Other woven cloth, of stainless steel:	Free	-	Section 301Section 232
7314.14.10.00	With meshes not finer than 12 wires to the lineal centimeter in warp or filling	Free	-	Section 301Section 232
7314.14.20.00	With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling	Free	-	Section 301Section 232
7314.14.30.00	With 94 or more wires to the lineal centimeter	Free	-	Section 301Section 232
7314.14.60.00	Other	Free	-	Section 301Section 232
7314.14.90.00	Other	Free	-	Section 301Section 232
7314.19.01.00	Other	Free	-	Section 301Section 232
7314.20.00.00	Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more	Free	-	Section 301Section 232
7314.31	Plated or coated with zinc:	Free	-	Section 301Section 232
7314.31.10.00	Wire fencing plated or coated with zinc, whether or not covered with plastic material	Free	-	Section 301Section 232
7314.31.50	Other:	Free	-	Section 301Section 232
7314.31.50.10	Welded wire stucco netting, furred, not reinforced with supplemental horizontal wire	Free	-	Section 301Section 232
7314.31.50.80	Other	Free	-	Section 301Section 232
7314.39.00.00	Other	Free	-	Section 301Section 232
7314.41.00	Plated or coated with zinc	Free	-	Section 301Section 232
7314.41.00.30	Chain link fencing	Free	-	Section 301Section 232
7314.41.00.40	Of wire with maximum cross- sectional dimension of 1 mm	Free	-	Section 301Section 232
7314.41.00.45	Other	Free	-	Section 301Section 232
7314.41.00.80	Other	Free	-	Section 301Section 232
7314.42.00	Coated with plastics	Free	-	Section 301Section 232
7314.42.00.30	Chain link fencing	Free	-	Section 301Section 232
7314.42.00.60	Other	Free	-	Section 301Section 232
7314.49	Other:	Free	-	Section 301Section 232
7314.49.30.00	Not cut to shape	Free	-	Section 301Section 232
7314.49.60.00	Cut to shape	Free	-	Section 301Section 232
7314.50.00.00	Expanded metal	Free	-	Section 301Section 232
7315	Chain and parts thereof, of iron or steel:	Free	-	Section 301Section 232
7315.11.00	Roller chain	Free	-	Section 301Section 232
7315.11.00.05	For motor vehicles	Free	-	Section 301Section 232
7315.11.00.10	Bicycle chains	Free	-	Section 301Section 232
7315.11.00.45	Other	Free	-	Section 301Section 232
7315.11.00.60	Other	Free	-	Section 301Section 232
7315.12.00	Other chain	Free	-	Section 301Section 232
7315.12.00.20	Of not over 50 mm pitch and containing more than 3 parts per pitch	Free	-	Section 301Section 232
7315.12.00.40	Welded steel chain	Free	-	Section 301Section 232
7315.12.00.60	Cast and combination chain	Free	-	Section 301Section 232
7315.12.00.80	Other	Free	-	Section 301Section 232
7315.19.00.00	Parts	Free	-	Section 301Section 232
7315.20	Skid chain:	Free	-	Section 301Section 232
7315.20.10.00	Not over 8 mm in diameter	Free	-	Section 301Section 232
7315.20.50.00	Over 8 mm in diameter	Free	-	Section 301Section 232
7315.81.00.00	Stud link	Free	-	Section 301Section 232
7315.82	Other, welded link:	Free	-	Section 301Section 232
7315.82.10.00	Not over 10 mm in diameter	Free	-	Section 301Section 232
7315.82.30.00	Over 10 mm in diameter	Free	-	Section 301Section 232
7315.82.50.00	Not over 10 mm in diameter	Free	-	Section 301Section 232
7315.82.70.00	Over 10 mm in diameter	Free	-	Section 301Section 232
7315.89	Other:	Free	-	Section 301Section 232
7315.89.10.00	Not over 8 mm in diameter	1.5%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7315.89.30.00	Over 8 mm in diameter	Free	-	Section 301Section 232
7315.89.50.00	Other	3.9%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7315.90.00.00	Other parts	2.9%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7316.00.00.00	Anchors, grapnels and parts thereof, of iron or steel	Free	-	Section 301Section 232
7317.00	Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper:	Free	-	Section 301Section 232
7317.00.10.00	Thumb tacks	Free	-	Section 301Section 232
7317.00.20.00	Not threaded	Free	-	Section 301Section 232
7317.00.30.00	Threaded	Free	-	Section 301Section 232
7317.00.55	Made of round wire	Free	-	Section 301Section 232
7317.00.55.01	Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized	Free	-	Section 301Section 232
7317.00.55.02	Galvanized	Free	-	Section 301Section 232
7317.00.55.03	Other	Free	-	Section 301Section 232
7317.00.55.05	Galvanized	Free	-	Section 301Section 232
7317.00.55.07	Other	Free	-	Section 301Section 232
7317.00.55.08	Assembled in a paper strip	Free	-	Section 301Section 232
7317.00.55.11	Assembled in a wire strip	Free	-	Section 301Section 232
7317.00.55.18	Other	Free	-	Section 301Section 232
7317.00.55.19	With a length of less than 25.4 mm and with a diameter of less than 1.65 mm	Free	-	Section 301Section 232
7317.00.55.20	Not coated, plated or painted	Free	-	Section 301Section 232
7317.00.55.30	Galvanized	Free	-	Section 301Section 232
7317.00.55.40	Vinyl, resin or cement coated	Free	-	Section 301Section 232
7317.00.55.50	Other	Free	-	Section 301Section 232
7317.00.55.60	Not coated, plated or painted	Free	-	Section 301Section 232
7317.00.55.70	Galvanized	Free	-	Section 301Section 232
7317.00.55.80	Vinyl, resin or cement coated	Free	-	Section 301Section 232
7317.00.55.90	Other	Free	-	Section 301Section 232
7317.00.65	Other	Free	-	Section 301Section 232
7317.00.65.30	Cut	Free	-	Section 301Section 232
7317.00.65.60	Other	Free	-	Section 301Section 232
7317.00.75.00	Of two or more pieces	Free	-	Section 301Section 232
7318	Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel:	Free	-	Section 301Section 232
7318.11.00.00	Coach screws	12.5%	Free (A+,AU,B,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301Section 232
7318.12.00.00	Other wood screws	12.5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7318.13.00	Screw hooks and screw rings	5.7%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7318.13.00.30	Having shanks or threads with a diameter of less than 6 mm	Free	-	Section 301Section 232
7318.13.00.60	Having shanks or threads with a diameter of 6 mm or more	Free	-	Section 301Section 232
7318.14	Self-tapping screws:	Free	-	Section 301Section 232
7318.14.10	Having shanks or threads with a diameter of less than 6 mm	6.2%	Free (A+,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 3.1% (JP)	Section 301Section 232
7318.14.10.30	Of stainless steel	Free	-	Section 301Section 232
7318.14.10.60	Other	Free	-	Section 301Section 232
7318.14.50	Having shanks or threads with a diameter of 6 mm or more	8.6%	Free (A+,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 4.3% (JP)	Section 301Section 232
7318.14.50.20	Of stainless steel	Free	-	Section 301Section 232
7318.14.50.80	Other	Free	-	Section 301Section 232
7318.15	Other screws and bolts, whether or not with their nuts or washers:	Free	-	Section 301Section 232
7318.15.20	Bolts and bolts and their nuts or washers entered or exported in the same shipment	Free	-	Section 301Section 232
7318.15.20.10	Having shanks or threads with a diameter of less than 6 mm	Free	-	Section 301Section 232
7318.15.20.20	Track bolts	Free	-	Section 301Section 232
7318.15.20.30	Structural bolts	Free	-	Section 301Section 232
7318.15.20.41	Right-angle anchor bolts	Free	-	Section 301Section 232
7318.15.20.46	Other	Free	-	Section 301Section 232
7318.15.20.51	Of stainless steel	Free	-	Section 301Section 232
7318.15.20.55	Other	Free	-	Section 301Section 232
7318.15.20.61	Of stainless steel	Free	-	Section 301Section 232
7318.15.20.65	Other	Free	-	Section 301Section 232
7318.15.20.91	Of stainless steel	Free	-	Section 301Section 232
7318.15.20.95	Other	Free	-	Section 301Section 232
7318.15.40.00	Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws)	Free	-	Section 301Section 232
7318.15.50	Studs	Free	-	Section 301Section 232
7318.15.50.30	Of stainless steel	Free	-	Section 301Section 232
7318.15.50.51	Of alloy steel	Free	-	Section 301Section 232
7318.15.50.56	Other	Free	-	Section 301Section 232
7318.15.50.90	Other	Free	-	Section 301Section 232
7318.15.60	Having shanks or threads with a diameter of less than 6 mm	6.2%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7318.15.60.10	Of stainless steel	Free	-	Section 301Section 232
7318.15.60.40	Other	Free	-	Section 301Section 232
7318.15.60.70	Of stainless steel	Free	-	Section 301Section 232
7318.15.60.80	Other	Free	-	Section 301Section 232
7318.15.80	Having shanks or threads with a diameter of 6 mm or more	8.5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7318.15.80.20	Set screws	Free	-	Section 301Section 232
7318.15.80.30	Of stainless steel	Free	-	Section 301Section 232
7318.15.80.45	Other	Free	-	Section 301Section 232
7318.15.80.55	Of stainless steel	Free	-	Section 301Section 232
7318.15.80.66	Cap screws	Free	-	Section 301Section 232
7318.15.80.69	Other	Free	-	Section 301Section 232
7318.15.80.82	Of stainless steel	Free	-	Section 301Section 232
7318.15.80.85	Other	Free	-	Section 301Section 232
7318.16.00	Nuts	Free	-	Section 301Section 232
7318.16.00.15	Non-locking chrome-plated	Free	-	Section 301Section 232
7318.16.00.30	Locking	Free	-	Section 301Section 232
7318.16.00.45	Other	Free	-	Section 301Section 232
7318.16.00.60	Of stainless steel	Free	-	Section 301Section 232
7318.16.00.85	Other	Free	-	Section 301Section 232
7318.19.00.00	Other	5.7%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.85% (JP)	Section 301Section 232
7318.21.00	Spring washers and other lock washers	5.8%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.9% (JP)	Section 301Section 232
7318.21.00.30	Helical spring lock washers	Free	-	Section 301Section 232
7318.21.00.90	Other	Free	-	Section 301Section 232
7318.22.00.00	Other washers	Free	-	Section 301Section 232
7318.23.00.00	Rivets	Free	-	Section 301Section 232
7318.24.00.00	Cotters and cotter pins	3.8%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7318.29.00.00	Other	2.8%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7319	Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included:	Free	-	Section 301Section 232
7319.40	Safety pins and other pins:	Free	-	Section 301Section 232
7319.40.20	Safety pins	4.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7319.40.20.10	On cards	Free	-	Section 301Section 232
7319.40.20.50	Other	Free	-	Section 301Section 232
7319.40.30.00	Dressmakers' or common pins	4.1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7319.40.50	Other	Free	-	Section 301Section 232
7319.40.50.10	Push pins	Free	-	Section 301Section 232
7319.40.50.50	Other	Free	-	Section 301Section 232
7319.90	Other:	Free	-	Section 301Section 232
7319.90.10.00	Sewing, darning or embroidery needles	Free	-	Section 301Section 232
7319.90.90.00	Other	2.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7320	Springs and leaves for springs, of iron or steel:	Free	-	Section 301Section 232
7320.10	Leaf springs and leaves therefor:	Free	-	Section 301Section 232
7320.10.30.00	To be used in motor vehicles having a G.V.W. not exceeding 4 metric tons	3.2%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7320.10.60	Other	3.2%	Free (A+,AU,B,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301Section 232
7320.10.60.15	Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor	Free	-	Section 301Section 232
7320.10.60.60	Other	Free	-	Section 301Section 232
7320.10.90	Other	3.2%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7320.10.90.15	Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor	Free	-	Section 301Section 232
7320.10.90.60	Other	Free	-	Section 301Section 232
7320.20	Helical springs:	Free	-	Section 301Section 232
7320.20.10.00	Suitable for motor-vehicle suspension	3.2%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7320.20.50	Other	3.9%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7320.20.50.10	Suitable for use in mattress supports and mattresses of heading 9404	Free	-	Section 301Section 232
7320.20.50.20	Other	Free	-	Section 301Section 232
7320.20.50.45	Helical springs, of wire having a cross-sectional dimension of 5.1 mm or more but less than 12.7 mm	Free	-	Section 301Section 232
7320.20.50.60	Other	Free	-	Section 301Section 232
7320.90	Other:	Free	-	Section 301Section 232
7320.90.10.00	Hairsprings	Free	-	Section 301Section 232
7320.90.50	Other	2.9%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7320.90.50.10	Suitable for use in mattress supports and mattresses of heading 9404	Free	-	Section 301Section 232
7320.90.50.20	Other	Free	-	Section 301Section 232
7320.90.50.60	Other	Free	-	Section 301Section 232
7321	Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar nonelectric domestic appliances, and parts thereof, of iron or steel:	Free	-	Section 301Section 232
7321.11	For gas fuel or for both gas and other fuels:	Free	-	Section 301Section 232
7321.11.10	Portable	5.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7321.11.10.30	Stoves or ranges	Free	-	Section 301Section 232
7321.11.10.60	Other	Free	-	Section 301Section 232
7321.11.30	Stoves or ranges:	Free	-	Section 301Section 232
7321.11.30.10	Of a maximum width not exceeding 70 centimeters	Free	-	Section 301Section 232
7321.11.30.20	Of a maximum width exceeding 70 but not exceeding 80 centimeters	Free	-	Section 301Section 232
7321.11.30.50	Of a maximum width exceeding 80 centimeters	Free	-	Section 301Section 232
7321.11.60.00	Other	Free	-	Section 301Section 232
7321.12.00.00	For liquid fuel	Free	-	Section 301Section 232
7321.19.00	Other, including appliances for solid fuel	Free	-	Section 301Section 232
7321.19.00.20	Hibachis	Free	-	Section 301Section 232
7321.19.00.40	Other	Free	-	Section 301Section 232
7321.19.00.60	Of cast iron	Free	-	Section 301Section 232
7321.19.00.80	Other	Free	-	Section 301Section 232
7321.81	For gas fuel or for both gas and other fuels:	Free	-	Section 301Section 232
7321.81.10.00	Portable	2.9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7321.81.50.00	Other	Free	-	Section 301Section 232
7321.82	For liquid fuel:	Free	-	Section 301Section 232
7321.82.10.00	Portable	2.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7321.82.50.00	Other	Free	-	Section 301Section 232
7321.89.00	Other, including appliances for solid fuel	Free	-	Section 301Section 232
7321.89.00.10	Fireplace grates of cast iron	Free	-	Section 301Section 232
7321.89.00.50	Other	Free	-	Section 301Section 232
7321.90	Parts:	Free	-	Section 301Section 232
7321.90.10.00	Cooking chambers, whether or not assembled	Free	-	Section 301Section 232
7321.90.20.00	Top surface panels with or without burners or controls	Free	-	Section 301Section 232
7321.90.40.00	Door assemblies, incorporating more than one of the following: inner panel, outer panel, window, insulation	Free	-	Section 301Section 232
7321.90.50.00	Other	Free	-	Section 301Section 232
7321.90.60	Other	Free	-	Section 301Section 232
7321.90.60.40	Shelving and racks for cooking ovens	Free	-	Section 301Section 232
7321.90.60.60	Other	Free	-	Section 301Section 232
7321.90.60.90	Other	Free	-	Section 301Section 232
7322	Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel:	Free	-	Section 301Section 232
7322.11.00.00	Of cast iron	Free	-	Section 301Section 232
7322.19.00.00	Other	Free	-	Section 301Section 232
7322.90.00	Other, including parts	Free	-	Section 301Section 232
7322.90.00.15	Air heaters, not electrically heated, incorporating a motor-driven fan or blower	Free	-	Section 301Section 232
7322.90.00.30	Hot air distributors, not electrically heated, incorporating a motor-driven fan or blower	Free	-	Section 301Section 232
7322.90.00.45	Parts of air heaters and hot air distributors	Free	-	Section 301Section 232
7323	Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel:	Free	-	Section 301Section 232
7323.10.00.00	Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like	Free	-	Section 301Section 232
7323.91	Of cast iron, not enameled:	Free	-	Section 301Section 232
7323.91.10.00	Coated or plated with precious metal	Free	-	Section 301Section 232
7323.91.50	Other	5.3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7323.91.50.20	Bakeware (cookware not suitable for stove top use)	Free	-	Section 301Section 232
7323.91.50.40	Other	Free	-	Section 301Section 232
7323.92.00	Of cast iron, enameled	Free	-	Section 301Section 232
7323.92.00.20	Bakeware (cookware not suitable for stove top use)	Free	-	Section 301Section 232
7323.92.00.40	Other	Free	-	Section 301Section 232
7323.93.00	Of stainless steel	2%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7323.93.00.15	Teakettles	Free	-	Section 301Section 232
7323.93.00.35	Bakeware (cookware not suitable for stove top use)	Free	-	Section 301Section 232
7323.93.00.45	Other	Free	-	Section 301Section 232
7323.93.00.60	Kitchen ware	Free	-	Section 301Section 232
7323.93.00.80	Other	Free	-	Section 301Section 232
7323.94.00	Of iron (other than cast iron) or steel, enameled	2.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7323.94.00.10	Teakettles	Free	-	Section 301Section 232
7323.94.00.21	Bakeware (cookware not suitable for stove top use)	Free	-	Section 301Section 232
7323.94.00.26	Other	Free	-	Section 301Section 232
7323.94.00.30	Kitchen ware	Free	-	Section 301Section 232
7323.94.00.40	Other	Free	-	Section 301Section 232
7323.94.00.80	Other	Free	-	Section 301Section 232
7323.99	Other:	Free	-	Section 301Section 232
7323.99.10.00	Coated or plated with silver	Free	-	Section 301Section 232
7323.99.30.00	Other	8.2%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7323.99.50	Of tinplate	Free	-	Section 301Section 232
7323.99.50.30	Kitchen or tableware suitable for food or drink contact	Free	-	Section 301Section 232
7323.99.50.60	Other	Free	-	Section 301Section 232
7323.99.70.00	Cookingware	5.3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7323.99.90	Other	3.4%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7323.99.90.30	Kitchen or tableware suitable for food or drink contact	Free	-	Section 301Section 232
7323.99.90.40	Gates for confining children or pets	Free	-	Section 301Section 232
7323.99.90.80	Other	Free	-	Section 301Section 232
7324	Sanitary ware and parts thereof, of iron or steel:	Free	-	Section 301Section 232
7324.10.00	Sinks and wash basins, of stainless steel	3.4%	Free (A*,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7324.10.00.10	Stainless steel sinks with one or more drawn bowls (basins)	Free	-	Section 301Section 232
7324.10.00.50	Other	Free	-	Section 301Section 232
7324.21	Of cast iron, whether or not enamelled:	Free	-	Section 301Section 232
7324.21.10.00	Coated or plated with precious metal	Free	-	Section 301Section 232
7324.21.50.00	Other	Free	-	Section 301Section 232
7324.29.00.00	Other	Free	-	Section 301Section 232
7324.90.00.00	Other, including parts	Free	-	Section 301Section 232
7325	Other cast articles of iron or steel:	Free	-	Section 301Section 232
7325.10.00	Of nonmalleable cast iron	Free	-	Section 301Section 232
7325.10.00.10	Manhole covers, rings and frames	Free	-	Section 301Section 232
7325.10.00.20	Catch basins, grates and frames	Free	-	Section 301Section 232
7325.10.00.25	Cleanout covers and frames	Free	-	Section 301Section 232
7325.10.00.30	Valve and service boxes	Free	-	Section 301Section 232
7325.10.00.35	Meter boxes	Free	-	Section 301Section 232
7325.10.00.80	Other	Free	-	Section 301Section 232
7325.91.00.00	Grinding balls and similar articles for mills	2.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7325.99	Other:	Free	-	Section 301Section 232
7325.99.10.00	Of cast iron	Free	-	Section 301Section 232
7325.99.50.00	Other	2.9%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7326	Other articles of iron or steel:	Free	-	Section 301Section 232
7326.11.00.00	Grinding balls and similar articles for mills	Free	-	Section 301Section 232
7326.19.00	Other	2.9%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7326.19.00.10	Forged	Free	-	Section 301Section 232
7326.19.00.80	Other	Free	-	Section 301Section 232
7326.20.00	Articles of iron or steel wire	3.9%	Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7326.20.00.10	Belts and belting	Free	-	Section 301Section 232
7326.20.00.20	Garment hangers	Free	-	Section 301Section 232
7326.20.00.30	Sod staples, U staples, irrigation staples, ground staples, and ground pins	Free	-	Section 301Section 232
7326.20.00.40	Double loop bar ties and double loop wire ties	Free	-	Section 301Section 232
7326.20.00.55	Paint roller frames	Free	-	Section 301Section 232
7326.20.00.90	Other	Free	-	Section 301Section 232
7326.90	Other:	Free	-	Section 301Section 232
7326.90.10.00	Of tinplate	Free	-	Section 301Section 232
7326.90.25.00	Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not cut to length	Free	-	Section 301Section 232
7326.90.35.00	Containers of a kind normally carried on the person, in the pocket or in the handbag	7.8%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301Section 232
7326.90.45.00	Horse and mule shoes	Free	-	Section 301Section 232
7326.90.60.00	Coated or plated with precious metal	8.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7326.90.86	Other	2.9%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301Section 232
7326.90.86.05	Rods for electrical grounding	Free	-	Section 301Section 232
7326.90.86.10	Laminated goods consisting of two or more flat-rolled sheets of iron or steel held together with an adhesive or having a core of non-metallic material	Free	-	Section 301Section 232
7326.90.86.30	Hangers and similar supports for tubes and pipes	Free	-	Section 301Section 232
7326.90.86.35	Fence posts, studded with corrugations, knobs, studs, notches or similar protrusions, with or without anchor plates	Free	-	Section 301Section 232
7326.90.86.45	Barbed tape	Free	-	Section 301Section 232
7326.90.86.60	Ladders	Free	-	Section 301Section 232
7326.90.86.75	Paint roller frames (other than of iron or steel wire)	Free	-	Section 301Section 232
7326.90.86.76	Metal handles for brooms, mops, paint applicators and similar products	Free	-	Section 301Section 232
7326.90.86.77	Burial caskets	Free	-	Section 301Section 232
7326.90.86.88	Other	Free	-	Section 301Section 232

Need a product-level review with tariff logic and country-specific duties?

Go to Tariff Search

Last verified and sources

Last verified: June 2, 2026

Rates and trade context on this page are checked against official tariff, customs, trade-policy, and import-data sources. Use the calculator for an item-specific duty stack before making entry, quote, or purchase decisions.

USITC HTS

Harmonized Tariff Schedule classifications and base duty rates.

Federal Register

Presidential proclamations, trade-remedy notices, and rule changes.

CBP

Customs entry, fee, ruling, and enforcement guidance.

USTR

Section 301 and trade-policy program source material.

Census trade data

US import value and origin-country trade data.

View Chapter 73 trade data & analysis →