Harmonized Tariff Schedule
Chapter 76: Aluminum
HTS Chapter 76 covers aluminum imported into the United States. Use this page to review tariff classifications, MFN duty rates, and special program rates by code.
HTS Codes in Chapter 76
181 codes| Code | Description | General Rate | Special Rate | Flags |
|---|---|---|---|---|
| 7601 | Unwrought aluminum: | Free | - | Section 301Section 232 |
| 7601.10 | Aluminum, not alloyed: | Free | - | Section 301Section 232 |
| 7601.10.30.00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | 2.6% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7601.10.60 | Other | Free | - | Section 301Section 232 |
| 7601.10.60.40 | Of 99.9 percent aluminum or greater | Free | - | Section 301Section 232 |
| 7601.10.60.45 | Of greater than 99.8 percent but less than 99.9 percent | Free | - | Section 301Section 232 |
| 7601.10.60.90 | Other | Free | - | Section 301Section 232 |
| 7601.20 | Aluminum alloys: | Free | - | Section 301Section 232 |
| 7601.20.30.00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | 2.6% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7601.20.60.00 | Containing 25 percent or more by weight of silicon | 2.1% | Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7601.20.90 | Other | Free | - | Section 301Section 232 |
| 7601.20.90.30 | Aluminum vanadium master alloy | Free | - | Section 301Section 232 |
| 7601.20.90.45 | Of uniform circular cross section throughout its length, the foregoing comprised of billets, not in coils | Free | - | Section 301Section 232 |
| 7601.20.90.60 | Other, containing 0.03 percent or more by weight of lead (secondary aluminum) | Free | - | Section 301Section 232 |
| 7601.20.90.75 | Remelt scrap ingot | Free | - | Section 301Section 232 |
| 7601.20.90.80 | Sheet ingot (slab) of a kind described in statistical note 3 to this chapter | Free | - | Section 301Section 232 |
| 7601.20.90.85 | Foundry ingot of a kind described in statistical note 4 to this chapter | Free | - | Section 301Section 232 |
| 7601.20.90.95 | Other | Free | - | Section 301Section 232 |
| 7602.00.00 | Aluminum waste and scrap | Free | - | Section 301Section 232 |
| 7602.00.00.35 | Recyclable used beverage containers | Free | - | Section 301Section 232 |
| 7602.00.00.95 | Recyclable aluminum from industrial processes, including turnings, borings, shavings, filings, clippings and chips | Free | - | Section 301Section 232 |
| 7602.00.00.97 | Other recyclable aluminum | Free | - | Section 301Section 232 |
| 7602.00.00.98 | Other | Free | - | Section 301Section 232 |
| 7603 | Aluminum powders and flakes: | Free | - | Section 301Section 232 |
| 7603.10.00.00 | Powders of non-lamellar structure | 5% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7603.20.00.00 | Powders of lamellar structure; flakes | 3.9% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7604 | Aluminum bars, rods and profiles: | Free | - | Section 301Section 232 |
| 7604.10 | Of aluminum, not alloyed: | Free | - | Section 301Section 232 |
| 7604.10.10.00 | Profiles | 5% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7604.10.30.00 | Having a round cross section | 2.6% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7604.10.50.00 | Other | 3% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7604.21.00 | Hollow profiles | 1.5% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7604.21.00.10 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | Free | - | Section 301Section 232 |
| 7604.21.00.90 | Other | Free | - | Section 301Section 232 |
| 7604.29 | Other: | Free | - | Section 301Section 232 |
| 7604.29.10 | Other profiles | 5% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7604.29.10.10 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | Free | - | Section 301Section 232 |
| 7604.29.10.90 | Other | Free | - | Section 301Section 232 |
| 7604.29.30 | Having a round cross section | 2.6% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7604.29.30.30 | High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter | Free | - | Section 301Section 232 |
| 7604.29.30.60 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | Free | - | Section 301Section 232 |
| 7604.29.30.90 | Other | Free | - | Section 301Section 232 |
| 7604.29.50 | Other | 3% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7604.29.50.20 | High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter | Free | - | Section 301Section 232 |
| 7604.29.50.50 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | Free | - | Section 301Section 232 |
| 7604.29.50.90 | Other | Free | - | Section 301Section 232 |
| 7605 | Aluminum wire: | Free | - | Section 301Section 232 |
| 7605.11.00.00 | Of which the maximum cross-sectional dimension exceeds 7 mm | 2.6% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7605.19.00.00 | Other | 4.2% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7605.21.00.00 | Of which the maximum cross-sectional dimension exceeds 7 mm | 2.6% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7605.29.00.00 | Other | 4.2% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7606 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm: | Free | - | Section 301Section 232 |
| 7606.11 | Of aluminum, not alloyed: | Free | - | Section 301Section 232 |
| 7606.11.30 | Not clad | 3% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7606.11.30.30 | With a thickness of more than 6.3 mm | Free | - | Section 301Section 232 |
| 7606.11.30.60 | With a thickness of 6.3 mm or less | Free | - | Section 301Section 232 |
| 7606.11.60.00 | Clad | 2.7% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7606.12 | Of aluminum alloys: | Free | - | Section 301Section 232 |
| 7606.12.30 | Not clad | 3% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7606.12.30.15 | High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter | Free | - | Section 301Section 232 |
| 7606.12.30.25 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | Free | - | Section 301Section 232 |
| 7606.12.30.35 | Other | Free | - | Section 301Section 232 |
| 7606.12.30.45 | Body stock | Free | - | Section 301Section 232 |
| 7606.12.30.55 | Lid stock | Free | - | Section 301Section 232 |
| 7606.12.30.91 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | Free | - | Section 301Section 232 |
| 7606.12.30.96 | Other | Free | - | Section 301Section 232 |
| 7606.12.60.00 | Clad | 6.5% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7606.91 | Of aluminum, not alloyed: | Free | - | Section 301Section 232 |
| 7606.91.30 | Not clad | 3% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7606.91.30.55 | With a thickness of more than 6.3 mm | Free | - | Section 301Section 232 |
| 7606.91.30.95 | With a thickness of 6.3 mm or less | Free | - | Section 301Section 232 |
| 7606.91.60 | Clad | 2.7% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7606.91.60.55 | With a thickness of more than 6.3 mm | Free | - | Section 301Section 232 |
| 7606.91.60.95 | With a thickness of 6.3 mm or less | Free | - | Section 301Section 232 |
| 7606.92 | Of aluminum alloys: | Free | - | Section 301Section 232 |
| 7606.92.30 | Not clad | 3% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7606.92.30.25 | With a thickness of more than 6.3 mm | Free | - | Section 301Section 232 |
| 7606.92.30.35 | With a thickness of 6.3 mm or less | Free | - | Section 301Section 232 |
| 7606.92.60 | Clad | 6.5% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7606.92.60.55 | With a thickness of more than 6.3 mm | Free | - | Section 301Section 232 |
| 7606.92.60.95 | With a thickness of 6.3 mm or less | Free | - | Section 301Section 232 |
| 7607 | Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm: | Free | - | Section 301Section 232 |
| 7607.11 | Rolled but not further worked: | Free | - | Section 301Section 232 |
| 7607.11.30.00 | Of a thickness not exceeding 0.01 mm | 5.8% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7607.11.60 | Of a thickness exceeding 0.01 mm | 5.3% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7607.11.60.10 | Boxed aluminum foil weighing not more than 11.3 kg | Free | - | Section 301Section 232 |
| 7607.11.60.90 | Other | Free | - | Section 301Section 232 |
| 7607.11.90 | Other | 3% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7607.11.90.30 | Body stock | Free | - | Section 301Section 232 |
| 7607.11.90.60 | Lid stock | Free | - | Section 301Section 232 |
| 7607.11.90.90 | Other | Free | - | Section 301Section 232 |
| 7607.19 | Other: | Free | - | Section 301Section 232 |
| 7607.19.10.00 | Etched capacitor foil | 5.3% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7607.19.30.00 | Cut to shape, of a thickness not exceeding 0.15 mm | 5.7% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7607.19.60.00 | Other | 3% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7607.20 | Backed: | Free | - | Section 301Section 232 |
| 7607.20.10.00 | Covered or decorated with a character, design, fancy effect or pattern | 3.7% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7607.20.50.00 | Other | Free | - | Section 301Section 232 |
| 7608 | Aluminum tubes and pipes: | Free | - | Section 301Section 232 |
| 7608.10.00 | Of aluminum, not alloyed | 5.7% | Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7608.10.00.30 | Seamless | Free | - | Section 301Section 232 |
| 7608.10.00.90 | Other | Free | - | Section 301Section 232 |
| 7608.20.00 | Of aluminum alloys | 5.7% | Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7608.20.00.30 | Seamless | Free | - | Section 301Section 232 |
| 7608.20.00.90 | Other | Free | - | Section 301Section 232 |
| 7609.00.00.00 | Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves) | 5.7% | Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7610 | Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures: | Free | - | Section 301Section 232 |
| 7610.10.00 | Doors, windows and their frames and thresholds for doors | 5.7% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7610.10.00.10 | Windows and their frames | Free | - | Section 301Section 232 |
| 7610.10.00.20 | Thresholds for doors | Free | - | Section 301Section 232 |
| 7610.10.00.30 | Other | Free | - | Section 301Section 232 |
| 7610.90.00 | Other | 5.7% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7610.90.00.20 | Sheet-metal roofing, siding, flooring, and roof guttering and drainage equipment | Free | - | Section 301Section 232 |
| 7610.90.00.40 | Architectural and ornamental work | Free | - | Section 301Section 232 |
| 7610.90.00.60 | Mobile homes | Free | - | Section 301Section 232 |
| 7610.90.00.80 | Other | Free | - | Section 301Section 232 |
| 7611.00.00 | Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment | 2.6% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7611.00.00.30 | Tanks | Free | - | Section 301Section 232 |
| 7611.00.00.90 | Other | Free | - | Section 301Section 232 |
| 7612 | Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment: | Free | - | Section 301Section 232 |
| 7612.10.00.00 | Collapsible tubular containers | 2.4% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7612.90 | Other: | Free | - | Section 301Section 232 |
| 7612.90.10 | Of a capacity not exceeding 20 liters | 5.7% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7612.90.10.40 | With a circular cross section, of a kind used for aerosols | Free | - | Section 301Section 232 |
| 7612.90.10.45 | Other | Free | - | Section 301Section 232 |
| 7612.90.10.60 | Cans of a capacity exceeding 355 ml but less than 3.8 liters | Free | - | Section 301Section 232 |
| 7612.90.10.90 | Other | Free | - | Section 301Section 232 |
| 7612.90.50.00 | Other | Free | - | Section 301Section 232 |
| 7613.00.00.00 | Aluminum containers for compressed or liquefied gas | 5% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7614 | Stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum, not electrically insulated: | Free | - | Section 301Section 232 |
| 7614.10 | With steel core: | Free | - | Section 301Section 232 |
| 7614.10.10.00 | Not fitted with fittings and not made up into articles | 4.9% | Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7614.10.50.00 | Fitted with fittings or made up into articles | 4.9% | Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7614.90 | Other: | Free | - | Section 301Section 232 |
| 7614.90.20 | Electrical conductors | 4.9% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7614.90.20.30 | With a cross-sectional area less than 240 mm² | Free | - | Section 301Section 232 |
| 7614.90.20.60 | With a cross-sectional area greater than or equal to 240 mm² | Free | - | Section 301Section 232 |
| 7614.90.40.00 | Other | 4.9% | Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7614.90.50.00 | Fitted with fittings or made up into articles | 5.7% | Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7615 | Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum: | Free | - | Section 301Section 232 |
| 7615.10 | Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like: | Free | - | Section 301Section 232 |
| 7615.10.11.00 | Pot scourers and scouring or polishing pads, gloves and the like | 3.1% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7615.10.20 | Cast | 3.1% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7615.10.20.15 | Bakeware (cookware not suitable for stove top use) | Free | - | Section 301Section 232 |
| 7615.10.20.25 | Other | Free | - | Section 301Section 232 |
| 7615.10.30 | Other | 3.1% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7615.10.30.15 | Bakeware (cookware not suitable for stove top use) | Free | - | Section 301Section 232 |
| 7615.10.30.25 | Other | Free | - | Section 301Section 232 |
| 7615.10.50 | Cast | 3.1% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7615.10.50.20 | Bakeware (cookware not suitable for stove top use) | Free | - | Section 301Section 232 |
| 7615.10.50.40 | Other | Free | - | Section 301Section 232 |
| 7615.10.71 | Other | 3.1% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7615.10.71.25 | Containers suitable for food preparation, baking, reheating or storage, 0.04 mm or more but not over 0.22 mm in thickness | Free | - | Section 301Section 232 |
| 7615.10.71.30 | Bakeware (cookware not suitable for stove top use) | Free | - | Section 301Section 232 |
| 7615.10.71.55 | Other | Free | - | Section 301Section 232 |
| 7615.10.71.80 | Other | Free | - | Section 301Section 232 |
| 7615.10.91.00 | Other | 3.1% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7615.20.00.00 | Sanitary ware and parts thereof | 3.8% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7616 | Other articles of aluminum: | Free | - | Section 301Section 232 |
| 7616.10 | Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles: | Free | - | Section 301Section 232 |
| 7616.10.10.00 | Nails, tacks and staples | 5.7% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7616.10.30.00 | Rivets | 4.7% | Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7616.10.50.00 | Cotters and cotter pins | 5.7% | Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7616.10.70 | Having shanks, threads or holes over 6 mm in diameter | 5.5% | Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.75% (JP) | Section 301Section 232 |
| 7616.10.70.30 | Threaded fasteners | Free | - | Section 301Section 232 |
| 7616.10.70.90 | Other | Free | - | Section 301Section 232 |
| 7616.10.90 | Other | 6% | Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7616.10.90.30 | Threaded fasteners | Free | - | Section 301Section 232 |
| 7616.10.90.90 | Other | Free | - | Section 301Section 232 |
| 7616.91.00.00 | Cloth, grill, netting and fencing, of aluminum wire | 2.5% | Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7616.99 | Other: | Free | - | Section 301Section 232 |
| 7616.99.10.00 | Luggage frames | Free | - | Section 301Section 232 |
| 7616.99.51 | Other | 2.5% | Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | Section 301Section 232 |
| 7616.99.51.20 | Laminated goods consisting of 2 or more flat-rolled sheets of aluminum held together with an adhesive or having a core of non-metallic material | Free | - | Section 301Section 232 |
| 7616.99.51.30 | Ladders | Free | - | Section 301Section 232 |
| 7616.99.51.40 | Venetian blinds and parts thereof | Free | - | Section 301Section 232 |
| 7616.99.51.50 | Hangers and supports for pipes and tubes | Free | - | Section 301Section 232 |
| 7616.99.51.60 | Castings | Free | - | Section 301Section 232 |
| 7616.99.51.70 | Forgings | Free | - | Section 301Section 232 |
| 7616.99.51.75 | Articles of wire | Free | - | Section 301Section 232 |
| 7616.99.51.90 | Other | Free | - | Section 301Section 232 |
Need a product-level review with tariff logic and country-specific duties?
Go to Tariff SearchLast verified and sources
Last verified: June 2, 2026
Rates and trade context on this page are checked against official tariff, customs, trade-policy, and import-data sources. Use the calculator for an item-specific duty stack before making entry, quote, or purchase decisions.
USITC HTS
Harmonized Tariff Schedule classifications and base duty rates.
Federal Register
Presidential proclamations, trade-remedy notices, and rule changes.
CBP
Customs entry, fee, ruling, and enforcement guidance.
USTR
Section 301 and trade-policy program source material.
Census trade data
US import value and origin-country trade data.